41 apache prop recommendation.
#1
Registered
Thread Starter
Join Date: May 2019
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
41 apache prop recommendation.
Picking up a 41 with 1000 horse blower motors. Number 3 speedmasters. Has 17.25x29p 4 blades and revs about 6200. What's your thoughts on getting rpm down and maybe gaining a couple mph? New to the boat scene btw!
#2
Platinum Member
Platinum Member
iTrader: (6)
Looks like No Reservations has a new owner ??
#4
Platinum Member
Platinum Member
iTrader: (6)
Congrats on the new ride, are the drives big shaft 3a's or 3's ? I dont think it was stated in the original post when it was for sale.
#7
Registered
I have a set of 32p x 18" 4 blades if interested? These went 93mph on my boat at 5200 RPM.
You prob have a similar setup, only diff is I have #5s which may be set higher than your 3s.
You prob have a similar setup, only diff is I have #5s which may be set higher than your 3s.
#10
Registered
$3K for the props - check to see if your props are 26 spline. These are for SSM6, and you will need the small plastic spacer sleeve to make them work on 3s. Also, not sure if you have the big shafts or not. Being #3s, you may have the smaller shafts and 19 spline.