|
Prop help for a Formula 292 with 1130hp
I run a Formula 292 singel engine a F1 boat.
I run it with a big block 557 with a whipple supercharger 1130hp around 1250nw, i have out driver IMCO SCX 1.34 with the 1400 SCX under, top speed 110mph at 6250rpm, i have more rpm up to 6600rpm its dyno to. I run Bravo 1 32" lab, it has work out best so far, but this session i have broke 2 props, that one blade is broken, i know to much power for this props, and why i ask for your help. The hull is with two step and the weighs is about 4851lbs what would you recommend |
The only way you are not going throw blades off with that much hp is to go to SSM6 props.
|
Originally Posted by Griff
(Post 4707590)
The only way you are not going throw blades off with that much hp is to go to SSM6 props.
|
IMCO does make a #6 prop shaft for the SCX 1400 lower.
|
I believe someone makes an adapter..........
|
Originally Posted by Harry75
(Post 4708032)
okay, but can i run a ssm6 prop on a IMCO SCX? #6 Speed Master Prop Shaft & Bearing Carrier Kit SCX,SCX 4, SCT, SCXT |
Thanks, but have anyone tested SSM6 prop on SCX 1400? I can not go up in dimension on the propeller 15.25 ”is max when I go -2 |
Originally Posted by Harry75
(Post 4708062)
Thanks, but have anyone tested SSM6 prop on SCX 1400? I can not go up in dimension on the propeller 15.25 ”is max when I go -2 |
| All times are GMT -5. The time now is 04:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.