Prop help for a Formula 292 with 1130hp
09-23-2019, 01:38 AM
#1
Registered
Thread Starter
Join Date: Feb 2017
Location: Sweden - Uppsala
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Prop help for a Formula 292 with 1130hp
I run a Formula 292 singel engine a F1 boat.
I run it with a big block 557 with a whipple supercharger 1130hp around 1250nw, i have out driver IMCO SCX 1.34 with the 1400 SCX under, top speed 110mph at 6250rpm, i have more rpm up to 6600rpm its dyno to.
I run Bravo 1 32" lab, it has work out best so far, but this session i have broke 2 props, that one blade is broken, i know to much power for this props, and why i ask for your help.
The hull is with two step and the weighs is about 4851lbs
what would you recommend
I run it with a big block 557 with a whipple supercharger 1130hp around 1250nw, i have out driver IMCO SCX 1.34 with the 1400 SCX under, top speed 110mph at 6250rpm, i have more rpm up to 6600rpm its dyno to.
I run Bravo 1 32" lab, it has work out best so far, but this session i have broke 2 props, that one blade is broken, i know to much power for this props, and why i ask for your help.
The hull is with two step and the weighs is about 4851lbs
what would you recommend
09-26-2019, 11:49 AM
#3
Registered
Thread Starter
Join Date: Feb 2017
Location: Sweden - Uppsala
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
09-26-2019, 01:11 PM
#6
Charter Member # 55
Charter Member
SCX's can be ordered with 3 different prop shafts.
#6 Speed Master Prop Shaft & Bearing Carrier Kit SCX,SCX 4, SCT, SCXT
#6 Speed Master Prop Shaft & Bearing Carrier Kit SCX,SCX 4, SCT, SCXT
