Upholstery staples?
 

Anything specific I should know or look for other than not to use the same cheap steel ones that are there and rotting/falling out...... Sucks when something really nice is all f'd up because of cut corners.

An old thread that I remember. Strip was not to happy with Mcleod.

http://www.offshoreonly.com/forums/g...es-advice.html

Picture
 

I used the monel (rust proof) on my trailer bunks, getting ready to do the same on the back seat bottom. These went through 16oz carpet just fine. They should go through the vinyl without any problems also. These are not pointed stables but worked fine, on new wood, old hard wood may be a little different though. Many different sizes, with and without point. Just google arrow monel staples and pick.

Thank you! Pictures are very helpful for a dummy like me lol

X2

You will notice that arrow makes a stainless steel staple but list it only as rust resistant where as the Monel staples are rust proof!

Jamie - I have both a manual and electic staple gun that takes a T-50 staple if you need to borrow it!

Jim that would be great! Thank you! Gonna pick some staples up today.

NP! Let me know when you need them and I will drop them off at the boats!

I found stainless staples at my local Lowes, FYI.

I found stainless steel staples at either Home Depot or Lowes. I believe they were Bostitch. This will be the third year and no issues

My H/D has Arrow SS staples. If they were going to rust they would have already around here.