Originally Posted by 250ekelly (Post 3992799)

thanks no I didn't paint it my room mate did. I gave him 2 months free rent which is like 600 bucks and 500 in paint & clear

Originally Posted by speeddemon651 (Post 4115090)

Watch out about putting your MSD box on the manifold (I realize the manifold is designed to mount it there). The electronics are completely potted internally but heat and ultrasonic vibration are MSD killers. Even putting it on a bracket off of the engine can act like mounting it to a tuning fork and over time shake it to death. Best place for it, is high and dry on the stern where it can stay cool and have the least about of ultrasonic vibration.

Worked in the Nascar industry for 6 years.

Originally Posted by 250ekelly (Post 4332698)

This is the resistor needed to make the alternator charge. Its 470ohm 2watt just run a keyed on 12v to this then into the Brown wire going into the alternator and yr set

http://i47.photobucket.com/albums/f1..._175741832.jpg

http://i47.photobucket.com/albums/f1..._175707701.jpg

Originally Posted by css19 (Post 4523711)

very good job man
I think my next project will be scarab
I have a question
What paint you used to paint the hull?
Is the process same as with painting cars? Or for painting boat is special paint?