10 Meter Updating
#33
Thread Starter
Registered
Joined: Dec 2007
Posts: 261
Likes: 5
From: Fairway, Kansas ( KC )
Tooling up the lake on the Shootout wkd, bout half way there I get a bad vibration from the back..... kills the starbrd engine. So I jump in the water to see if I lost the prop or snagged a volkswagen bus. Nothing... get back in to start and slip into gear, kills the engine again. Limping on a single... thank god for two !! Over to the closest marina to pull her out and find out whats going on.
#34
Thread Starter
Registered
Joined: Dec 2007
Posts: 261
Likes: 5
From: Fairway, Kansas ( KC )
Meanwhile the Shootout is going on, im pulling the drive off to see what is going on. Almost forgot.... having great friends to help you in a time of need, thanks kevin for the assistance and making sure I made it to the marina in one piece.
Got the drive off finally, after a couple of wallups from a bfh..... and find this[ATTACH=CONFIG]528794[/ATTACH][ATTACH=CONFIG]528795[/ATTACH]
The guys say to me... " thats burnt up and thats bent.... "
Got the drive off finally, after a couple of wallups from a bfh..... and find this[ATTACH=CONFIG]528794[/ATTACH][ATTACH=CONFIG]528795[/ATTACH]
The guys say to me... " thats burnt up and thats bent.... "
#36
Thread Starter
Registered
Joined: Dec 2007
Posts: 261
Likes: 5
From: Fairway, Kansas ( KC )
Sooooo..... now im talking to those people fron Konrad. Boy are they proud of that stuff, gonna have to find some coupons for this !!! Gonna make the wife get a third job to pay for this, somehow this has to be her fault.... right ?
#38
Thread Starter
Registered
Joined: Dec 2007
Posts: 261
Likes: 5
From: Fairway, Kansas ( KC )
Drive is fine... the bearing and u joint took the brunt of the load. Thanking my lucky stars.... thinking the bearing came apart then twisting the u-joint. Splines were unharmed.




