Offshoreonly.com - Engine build recommendations 454/502/or BOOST

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Restorations & Upgrades (https://www.offshoreonly.com/forums/restorations-upgrades-285/)

- - Engine build recommendations 454/502/or BOOST (https://www.offshoreonly.com/forums/restorations-upgrades/314504-engine-build-recommendations-454-502-boost.html)

Borgie

07-25-2014 01:41 PM

Quote:

Originally Posted by Thtottle bender (Post 4159620)

Second that stay 454 with good alluminum heads will be waaaay better than 496 , plus better rod ratio for longevity call Ron iskenderian "isky cam" he will make a custom bump stick with steel gear, keep lift under .700 for valvetrain reliability Ron will dial you in and you will Fly past that iron head 496 plus you'll loose 40 lbs off the transom and you can run one compression point higher with alluminum heads

If he runs a 6.385 rod, there will be zero issue with reliability...

KRAUSMOTORSPORTS

08-14-2014 05:20 PM

Quote:

Originally Posted by stimleck (Post 4159766)

Looked online couldnt fine it

Hey Stim,
I went off if pure memory ( which is going to chit apparently). It's Stainless Marine Miami Florida. At least that's what's stated on the top. I remember the SW and was thinkig stainless works for some reason. Here's a crappy pic but hope you get the idea.

http://i1168.photobucket.com/albums/...psebcb68db.jpg

Also a update.... Just dropped off the block for the 4 bolt mains and ARP studs.

All times are GMT -5. The time now is 04:27 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page