|
Dan I would agree with Monza , I would be concerned that any pounding might cause fatigue in the tanks in the areas not supported by the rubber strips .
If it was me I would foam in addition to the rubber supports . I am going to my Fiberglass supply house Monday to get supplies for the unapproved hatch I am going to fabricate , if you can wait til then I will do some research for you . Cheers RG. P.S. where can I get an Avatar like yours . |
Originally Posted by ICDEDPPL
(Post 4212055)
Rick, you are correct, completely unapproved project.. trying to skate under the radar so keep this on the DownLOW.
I was thinking of having a surveyer out to check my work but those guys are just so clueless about their job so my next step was to drive to Full Forces house for this project to be approved. I used 1/4" thick rubber strips all around the tank as a cushion. Thats what they sit on and thats what is on all sides and back. I`m not planning on using any water absorbing foam. From what Ive read I want air all around the tanks. Theres 18" more of tank under the firewall , they are tight in there. Appreciate any input or experiences however. |
$hit Rick we`re busted!! there goes your hatch project , please send me back all my measurements.
p.s. You can get my avatar at the greatest boat ever store |
Originally Posted by ICDEDPPL
(Post 4212464)
$hit Rick we`re busted!! there goes your hatch project , please send me back all my measurements.
p.s. You can get my avatar at the greatest boat ever store |
You and Borgie would be best friends I bet.
|
anyone have a link to sonic700's floor repair? I've been searching to no avail :(
|
I Can Help You With That Link
|
Originally Posted by sonic700
(Post 4212995)
I Can Help You With That Link
|
Dan any updates ?
Rick G. |
Its winter, thats my update :D
Shes put away for the next 5 months. |
| All times are GMT -5. The time now is 12:54 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.