40' Outlaw Upgrades - Twin 900Sc to 1000hp Duramax Diesels
02-26-2021, 12:59 PM
#1101
Registered
I've run Kaama drives for decades and their boot clamps are t-bolt style, never had a boot leak.
The following users liked this post:
kidturbo (02-26-2021)
The following 8 users liked this post by hogie roll:
2187 (03-02-2021), CDShack (03-02-2021), Gimme Fuel (03-02-2021), hoodoo (03-01-2021), kidturbo (03-02-2021), Knot 4 Me (03-05-2021), rak rua (03-01-2021), Twin O/B Sonic (03-01-2021)
03-05-2021, 12:08 AM
#1103
Registered
Thread Starter
After another 3 days of on the dock soak, with another 50 miles on Sarasota bay, we decided to pull it out and check the milkshake machines. While on the dock I tightened a couple hose clamps, verified the port exhaust leak is fixed, calibrated the fuel gauge, and tested the new CP3 pump. Everything inside the transom is getting dialed in finally..
The weatherman said it was gonna get windy tomorrow, so figured I'd best get back on the trailer asap. Well it was a bit windy on the bay today also. But these diesels in 15klbs of boat ran great down wind at 65mph. Tabs flat and drives trimmed up, she slips over 3 footers with ease. Upwind takes a bit more neg trim, but still a great ride.
The weatherman said it was gonna get windy tomorrow, so figured I'd best get back on the trailer asap. Well it was a bit windy on the bay today also. But these diesels in 15klbs of boat ran great down wind at 65mph. Tabs flat and drives trimmed up, she slips over 3 footers with ease. Upwind takes a bit more neg trim, but still a great ride.
VIP Member
The following 3 users liked this post by Quinlan:
03-05-2021, 09:40 AM
#1105
Registered
What brand of deer whistles do you have on that thing? They sure are loud!
The following 5 users liked this post by IGetWet:
2187 (03-05-2021), Gimme Fuel (03-08-2021), hogie roll (03-05-2021), kidturbo (03-05-2021), smashm (03-05-2021)
03-05-2021, 10:49 AM
#1106
Registered
Thread Starter
The following 3 users liked this post by kidturbo:
03-06-2021, 04:59 PM
#1107
Registered
Thread Starter
Both the Milkshake machines are still working well.
This Compass synthetic 75W90 is some good stuff. Holds water in suspension like machine cutting lube. In fact, think I'll bottle and resell it as such..
This Compass synthetic 75W90 is some good stuff. Holds water in suspension like machine cutting lube. In fact, think I'll bottle and resell it as such..
The following users liked this post:
2187 (03-06-2021)
03-06-2021, 06:24 PM
#1108
Registered
Thread Starter
Her first good Cover photos. In non-swimsuit mode..
The following 2 users liked this post by kidturbo:
2187 (03-07-2021), Gimme Fuel (03-08-2021)
03-06-2021, 07:05 PM
#1109
Registered
Dude, I’m the guy in the hockey helmet in the back of the shop beating my head against the wall but, bag it.
Call it a day.
Bolt on some real drives and show us what some real smokers will do!
Call it a day.
Bolt on some real drives and show us what some real smokers will do!
The following 3 users liked this post by Twin O/B Sonic:
03-06-2021, 10:08 PM
#1110
Registered
Thread Starter
Its not a direct bolt up now to change drives. Would require some extension boxes, like these I found last week.. :-)
The following 5 users liked this post by kidturbo:
2187 (03-07-2021), Gimme Fuel (03-08-2021), IGetWet (03-07-2021), payuppsucker (03-07-2021), Twin O/B Sonic (03-07-2021)
