Scarab 28 - K-Planes
 

We have tabs! They are installed @ 12 degrees rather than usual 24 - and set towards the drive where they will work effectively. With the X dimension raised 2", the drive set back an additional 7" and an Imco 2" shortie, the boat's running attitude should highly improve. Add 30" tabs and we should be able to ride them along the back.

Looking great!
Is there any rise in the setback or just the -2 in the shorty?

Thanks Katanna!

Yes, the X is raised 2". Dan said it was buried before and it needed to come up to unlock the hull especially with the extension box = the reason for the 30" tabs.

Can't wait to hear how this works out. I would do the same to mine if it allows the boat to fly level.

Scarab 28 - Custom Dash & Gauges
 

Here's what the gauges look like in the new dash cluster.

Do you think Dan could easily make a second Dash panel. I would love to swap mine out like one you have.

or two?

LOL, we talked about how he should make a mold out of mine; it's a nice cluster with a factory look. I'll let him know he has an audience of interest.

Scarab 28 - Dash assembly
 

Not quite there but it's a teaser. A ways to go still; pop-up indicators, helm box, Imco hydraulic tilt helm, install Livorsi Depth gauge, stereo/media controls, warning light, & a few more things.

Scarab 28 - Dash
 

Pop-up indicators are on order (custom made for this setup/style). They will sit where the original trim switches were. Looking to mount the Clarion remote control in the in the middle between Indicators & Trim Switches. An Imco helm (most likely with Tilt) will be installed and finished with an Isotta Ares steering wheel.