GCMSINC

This project has been in progress for a little over a year now from the point of conception. I wanted to be at least knee deep into it before I started the thread on the project.
This is my second project of a over the top restoration and my first Turbine Powered project. The first project "Drag "N" Fever" was suppose to be a Turbine powered project but things just didn't work out that way but was still a work of art.
This project is a 2001 WARLOCK 25 SXC CAT that run a honest 85 MPH with a Mercury 500 HP Blue factory race engine and a Bravo drive with extension box and IMCO lower. It will now be powered with a T-53 Custom Turbine Engine from Jim Grasham of Principal Propulsion Systems, "PPS", Driving a Custom Arneson ASD-8 through a SCS gear box.

Photos to come. The system will not let me post until I have made 10 posts.

GCMSINC

Ok, the next few posts are to get past this 10 post thing so I can get the pics up.
The project has been named "Johnny Rocket"

GCMSINC

This project is not about speed as much as it is about being a cool turbine project.

GCMSINC

Top calculated speed with available HP and Torque would be around 180 MPH.

GCMSINC

The top somewhat safe speed will be in the 110 to 120 range.

GCMSINC

I am shooting for 0 - 100 in 10 seconds or less.

GCMSINC

There are hundreds of pic's on my FaceBook page.

GCMSINC

John Hice, Look for photo album

GCMSINC

Turbine Warlock Project

GCMSINC

Ok, I think this is post number 10.