What kind of paint did you use on the blower?

Thanks Torey!! Thanks again for the lower looks great!!

I used VHT wrinkle finish high temp black...I'll see if I can get a pic of it and post it...need to get some updated pics on here as well

https://www.vhtpaint.com/high-heat/vht-wrinkle-plus-coatings

heres a link to it..in black obviously lol

Thanks for paint reply ...

And that engine does look GREAT painted like that .... all business and Bad A$$ !!

hahah thanks!! That's what I was going for...I'm not a huge fan of chrome anyway but once it's all together with the interior and lights and everything when I pop the hatch I wanted it to look as mean as possible..have a new scoop for the carbs and still need to paint those but I'm hoping it all turns out how I see it in my head lol

wow just realized I am way behind on pics lol

I do have the new carpet in which you can slightly see in the interior pic of it tore apart I think....the piston, valve, and rockers were all after the first run thanks to the sh!tty head guy at the motor shop but they stood behind it and completely went through the entire motor again, new piston, new rockers, new taller poly locks, and all new ferrea valves with a new head guy since they fired the old one because of this. He never checked the guides before assembly and one stuck causing this so they put all new guides in as well. That's why I didn't get to use it at all last summer by the time all this got straightened out. Just fired her up for the first time a few weeks ago and before I could even set the timing the sea water pump smoked so still waiting to fire it and tune it...its been too damn cold to do anything here in good ole Michigan haha. Anyhow here's some more pics....

https://cimg9.ibsrv.net/gimg/www.off...d493727ed3.jpg
https://cimg4.ibsrv.net/gimg/www.off...40a50349ae.jpg
https://cimg7.ibsrv.net/gimg/www.off...fbf27da9d1.jpg
https://cimg8.ibsrv.net/gimg/www.off...fafe71955b.jpg
https://cimg3.ibsrv.net/gimg/www.off...b7190baa59.jpg
https://cimg4.ibsrv.net/gimg/www.off...294c53d40d.jpg
https://cimg6.ibsrv.net/gimg/www.off...ad83fd8d3d.jpg
https://cimg1.ibsrv.net/gimg/www.off...586fa2c884.jpg
https://cimg5.ibsrv.net/gimg/www.off...1751ec139c.jpg

And yes all the pulleys will be black as well...just put it together to get her running lol

Looking really good!!! If you need another set of hands let me know. I'm not to far up the road from ya....