|
sweet setup!!! keep the pics coming!
|
Got the cabin entry dash filler panel glued into place this weekend. Seems like it's probably the last of nice warm weather for the season. I'll have to wait till spring to grind out and bevel the joint to tab it in permanently. I don't want to risk getting a bad cure.https://cimg2.ibsrv.net/gimg/www.off...323078413a.jpg
https://cimg3.ibsrv.net/gimg/www.off...acf186e452.jpg |
Yeah, I live in Ohio and our weather just changed to where I have to plan my projects requiring heat to cure.
I the boats inside, you can do a lot w/a space heater and a tent built over that portion of project. Huge fire risk if left unattended but so far so good. |
Originally Posted by Twin O/B Sonic
(Post 4883966)
Yeah, I live in Ohio and our weather just changed to where I have to plan my projects requiring heat to cure.
I the boats inside, you can do a lot w/a space heater and a tent built over that portion of project. Huge fire risk if left unattended but so far so good. |
Got over to the boat today to retrieve all my tools, clean up and check out my work. It's really solid even without being fully glassed in. Can't wait till Spring so I can finish up the glass work!
https://cimg6.ibsrv.net/gimg/www.off...7e82a4ba15.jpg |
Yep.
I’ve got a bunch of parts to paint and kicking myself for not doing it before the weather turned. Im lucky and have a heated shop but it ain’t cheap to keep it at 70* for 24 hrs to cure paint/glass when it’s 20 outside! I even use the tent/space heater trick inside so I don’t have to super heat the whole shop. Your boats going to be a really nice, one off when done.
Originally Posted by haves0090
(Post 4884019)
Unfortunately I don't have indoor storage for my boat. Looks like I'm stuck doing layups in my garage till May or so. It looks like last was probably the last of our weather above 60⁰. The challenges of living North! 😂😂
|
https://cimg9.ibsrv.net/gimg/www.off...5014b01ff7.jpg
https://cimg7.ibsrv.net/gimg/www.off...b59f568e9c.jpg Templating/checking clearance https://cimg5.ibsrv.net/gimg/www.off...55e9b09d1d.jpg Templating... https://cimg8.ibsrv.net/gimg/www.off...60b5dd2877.jpg https://cimg0.ibsrv.net/gimg/www.off...4acdbe90a8.jpg |
Moving forward! Good to see you back at it!
|
https://cimg4.ibsrv.net/gimg/www.off...9a0b762660.jpg
This was a painful cut lol https://cimg6.ibsrv.net/gimg/www.off...181560762c.jpg More templates.... https://cimg8.ibsrv.net/gimg/www.off...4fd7e89431.jpg Dry fit https://cimg9.ibsrv.net/gimg/www.off...a3de59ced4.jpg Dry fitting some more https://cimg1.ibsrv.net/gimg/www.off...9ad9cfb405.jpg https://cimg3.ibsrv.net/gimg/www.off...ac7ff85575.jpg https://cimg4.ibsrv.net/gimg/www.off...f435d85aad.jpg Temporary jig to be sure it's square when i glue it in https://cimg7.ibsrv.net/gimg/www.off...877c9bcc9a.jpg https://cimg6.ibsrv.net/gimg/www.off...e73e310413.jpg https://cimg2.ibsrv.net/gimg/www.off...17d9075254.jpg https://cimg5.ibsrv.net/gimg/www.off...7ad40d990d.jpg https://cimg7.ibsrv.net/gimg/www.off...baeb534786.jpg |
| All times are GMT -5. The time now is 02:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.