![]() |
Originally Posted by LEOPAJM
(Post 3067886)
Do you like red ?
|
Originally Posted by Stormrider
(Post 3069696)
Artie, i'm a bit confused.
From some of our conversations, it seemed you had the drive and engine sitting around waiting for a hull. |
Originally Posted by jdub
(Post 3069629)
Damn Artie.......that sucks. Why not put the 509 in just to have a boat and dial in the drive height. When the new motor finally gets done all you'll have to do is drop it in and make up some new tailpipes.
|
Get it together Art!
We're waiting (and hoping for a ride) Sorry about the bad luck it'll get better chief! Uncle Dave |
Originally Posted by AIR TIME
(Post 3070349)
john the 509 should be inspected after they stole the carb and msd boxes and stuff Iam not sure if they dropped a nut down the intake ,so Iwant to pull it soon and change the cam springs intake and redyno right now its between 650 and 670 with the new carb but with the cam and intake might hit 700hp. and I need the new motor asap cause of all the rigging they were going to do WE ARE DOING. I am setting the drive next week and will hope the motor not to high for a scoop cause Iwant to raise the x from 14'' to 17 1/2'' with a prop shaft height of 3'' I hope the blower will fit with a scoop other wise its a new hatch. how is your motor install coming?
If you need any sort of measurements on the inside of the engine compartment ect..ect.. Just let me know & I would be glad to get them for you, mine is sitting 40 feet away.. My hatch is differant but I'm sure we could get a refreance point if needed.. Will the roots have an intercooler under it ?? Ifso I could be wrong but I think you will have trouble getting it under a flat hatch.. |
Originally Posted by littledcsrodshop
(Post 3070380)
Sorry to hear about the schedule issues & what you've had to go through with everything else..
If you need any sort of measurements on the inside of the engine compartment ect..ect.. Just let me know & I would be glad to get them for you, mine is sitting 40 feet away.. My hatch is differant but I'm sure we could get a refreance point if needed.. Will the roots have an intercooler under it ?? Ifso I could be wrong but I think you will have trouble getting it under a flat hatch.. |
Originally Posted by LowRida
(Post 3070089)
Love red. Sorry, really looking for new.
|
Originally Posted by LEOPAJM
(Post 3073223)
OK ..... good luck !
|
Originally Posted by AIR TIME
(Post 3074585)
lowrida it might be a good idea to look at leopajm boat it looks pretty new and if the price is right compared to new and since it would take time to build new compared to running in a few weeks it might be worth it. that red boat is one fine looker, wish mine was still factory red but the white and red has grown on me mite add some silver design to it this spring by ego grafix, or just run it and if money is flowing have steve bring it back to red with silver and yellow design next winter. I love a all red boats with with black or siver or yellow as secondary colors.
AND i believe you stated you wanted to be "testing" by the end of this summer ..... then you really have no choice . You can take a look at mine and be boating this year and next year as well . Sorry guys , facts are facts . Feel free to give me a call if you are in the market for a 41 Saber . 440-343-6284. |
Originally Posted by LEOPAJM
(Post 3067886)
Do you like red ?
|
| All times are GMT -5. The time now is 04:54 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.