Offshoreonly.com - 28 Cyclone Power Twins

Page 2 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Saber (https://www.offshoreonly.com/forums/saber-201/)

- - 28 Cyclone Power Twins (https://www.offshoreonly.com/forums/saber/356627-28-cyclone-power-twins.html)

bigboat28

09-20-2018 06:49 PM

Quote:

Originally Posted by SABER28 (Post 4649675)

i'm running 557 cid motors about 650 each. gps 93 using 27 pitch 3 blades. 1.36 ratio bravos

Nice speed, how many rpm are you turning?

I have a 28 Pantera with 555s 650hp and have seen 82 so far but I have speed Master IIIs.i hope to get to 90,.

SABER28

09-20-2018 07:12 PM

about 5800. would the #3 drives cost that much mph?

RBeyer

09-20-2018 11:51 PM

Quote:

Originally Posted by SABER28 (Post 4650283)

what kind of speed are you looking for?

I would like to be at 100 GPS. I'm 85 to 87 now.

bigboat28

09-21-2018 02:09 PM

Quote:

Originally Posted by SABER28 (Post 4650300)

about 5800. would the #3 drives cost that much mph?

I think the drives have something to do with it but also only getting slightly over 5000 rpm and one motor is only getting to around 4600 rpm.

RBeyer

09-21-2018 11:24 PM

Quote:

Originally Posted by bigboat28 (Post 4650449)

I think the drives have something to do with it but also only getting slightly over 5000 rpm and one motor is only getting to around 4600 rpm.

What props are you spinning

bigboat28

09-22-2018 10:35 AM

17.5 x 29

bigboat28

09-22-2018 10:36 AM

17.5 x 29

6" hub

RBeyer

09-24-2018 11:54 PM

Quote:

Originally Posted by bigboat28 (Post 4650560)

17.5 x 29

6" hub

I run Bravo drives 1,5 with Bravo 4 Blade 30's I can get 4650 to 4750 RMP I don't think I would get any more speed propping to 28's and the RPM would be tougher on the motors. It jumps up on plane with no problems and this is heavy with fuel. I can probably get 4800 light and cold weather.

TexomaPowerboater

10-04-2018 01:03 PM

Can any of you 28 Saber owner's help a brotha out and let me know the max height the boat is on a trailer. Also, please state whether or not your trailer has torsion axles or not.

SABER28

10-04-2018 09:55 PM

mine fits under a 7 foot garage door with about an 1/8 to spare. torsion axle manning aluminum trailer

All times are GMT -5. The time now is 07:03 PM.

Page 2 of 4

Show 40 post(s) from this thread on one page