Scarab Pics?
#94
Registered

Joined: Apr 2005
Posts: 957
Likes: 3
From: San Diego, Ca
#95
Registered
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
Was your originally fresh water cooled? Are you running TRS's with Borg Warners?
#96
Registered

Joined: Apr 2005
Posts: 957
Likes: 3
From: San Diego, Ca
I am running trs drives with merctrans.
Never had fresh water cooling...I have a really slick flushing set up were I can Hook 1 hose up to the side and flush both motors without even opening the hatches. I did not want to add it either because it is already hard enough to work in there as it is. I have the steel intake so it does ok.
Never had fresh water cooling...I have a really slick flushing set up were I can Hook 1 hose up to the side and flush both motors without even opening the hatches. I did not want to add it either because it is already hard enough to work in there as it is. I have the steel intake so it does ok.
Last edited by Westcoast; 12-11-2007 at 07:05 PM. Reason: added info
#97
Registered
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
I assume they are 454's, What kind of horsepower and speed do you see?
The 502's are making about 565HP ea. The boat will run mid 80's on a pitot speedo, Can't wait to see what she runs on a GPS!
The 502's are making about 565HP ea. The boat will run mid 80's on a pitot speedo, Can't wait to see what she runs on a GPS!
#98
Registered
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
#99
Registered

Joined: Apr 2005
Posts: 957
Likes: 3
From: San Diego, Ca
454's 330hp...60mph on my gps...
Your GPS will disappoint you!!
This is a very hard hull to make speed with. The outdrives are so deep in the water. If your hitting 80 then maybe they raised your x-dim. That might explain why your hatches are flush mounted...What props are you running?
Your GPS will disappoint you!!
This is a very hard hull to make speed with. The outdrives are so deep in the water. If your hitting 80 then maybe they raised your x-dim. That might explain why your hatches are flush mounted...What props are you running?
#100
Registered
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
I am expecting high 70's with over 1100HP but who knows, I am not sure what props I have and they are all tucked away right now for the winter. When I pull the other boat out of the garage I will take a look at the props.


