No problem, Any change you have a more straight on side shot, If not no biggie, just wondering!

Some stern shots....Jim-I got you email address and I will shot you over some nice shots!

old power (525SC) new power 600hp/650 ftlbs

I noticed your engine hatches are recessed, Is that factory, Mine are flush mounted so when you put the cushion's on they actually stick up above the deck height.

P.S. Here is a shot of what the dash board will look like with the new graphics.

Are you looking to go more wild then the red and white?

No...I just painted it 2 years ago...I am real happy with the look. It used to be pretty disco with some orange in the color...I wanted a real clean and sexy look. I removed all the hardware including the rails and installed pop up running lights, cleats etc. The hatches all came flush mounted unless you had a blower motor... or tunnel ram....I sure some one modified it...If mine were flush I might put a low profile scoop back there. Good luck with your dash...there is not alot to work with. I will post a picture of mine...

Here is a couple of the dash and motors

Here's my head turner:

http://farm3.static.flickr.com/2403/...b5c14e4930.jpg

Ed,

Here is a quick shot at it, The resolution of the picture was a little low which is why it looks a bit grainy, It gives a good idea though. Any chance you have a side shot with a higher resolution.

Not in the water...But Next time I am in the water I will take a money shot for you

Thanks, Your dash came out real nice too. I have some engine shots but they are @ home, I will upload tonight. The engines are out right now as they were a mess when I bought the boat. I am in the process of rewiring the entire boat and rebuilding the engines. I am modifing the engine mounts because 7 hours to remove the engines is not something I am willing to do more then once. I am designing the mounts so I can leave the exhaust manifolds on the engines when I remove them. anyway, I will upload some pics tonight.