Graphics for 1997 SCS
#1
Thread Starter
Registered
Joined: Jun 2006
Posts: 371
Likes: 0
From: Littleton,Co
I've searched this forum for graphics replacement but all the information is over 2 years old.
I need to replace the graphics that says "scarab scs" on both sides of the boat and the bow.
I've contacted Wellcraft customer service directly and they are no help at all.I have also searched the net until my fingers are sore from typing and came up empty!
Anyone know where I can get a set of these decals either OEM or an exact replica?
I need to replace the graphics that says "scarab scs" on both sides of the boat and the bow.
I've contacted Wellcraft customer service directly and they are no help at all.I have also searched the net until my fingers are sore from typing and came up empty!
Anyone know where I can get a set of these decals either OEM or an exact replica?
#3
Thread Starter
Registered
Joined: Jun 2006
Posts: 371
Likes: 0
From: Littleton,Co
Jackhammer,
The picture you posted is exactly what I'm looking for.You said the measurements are 8 foot long x 12 inches tall.Do you happen to know what the measurement are on the original decals?
The decals you have are they for both sides and the bow of the boat?
Are you interested in sell them if you have no use for them?
One last question,is that your scarab scs in the picture you posted?
The picture you posted is exactly what I'm looking for.You said the measurements are 8 foot long x 12 inches tall.Do you happen to know what the measurement are on the original decals?
The decals you have are they for both sides and the bow of the boat?
Are you interested in sell them if you have no use for them?
One last question,is that your scarab scs in the picture you posted?
#5
Thread Starter
Registered
Joined: Jun 2006
Posts: 371
Likes: 0
From: Littleton,Co
I think your corrrect when you say the larger one is for the bow of the boat.I still need the decal for the bow.Would you want to sell it and if so what will you want for it.Also if you dont mind me asking,where did you get it? Thanks for your input Jackhammer.
#6
Gold Member

Joined: Jun 2004
Posts: 749
Likes: 1
From: New Jersey
Wellcraft is of no help because they don't make Scarabs any more. They were not much help back in the day either. If you can get the measurements from your old boat, any good decal and sign shop can make the replacements.
#7
Registered

Joined: Nov 2003
Posts: 375
Likes: 4
From: Dallas, TX
I think a million dollars ought to cover it 
or, if you don't have a mil in your pocket you can send me a prepaid fedex label and I'll drop them at the nearest kinkos.
I got them from a knucklehead that wanted to put them on the side of a scarab III. You can take them to have scaled down versions made pretty easy.

or, if you don't have a mil in your pocket you can send me a prepaid fedex label and I'll drop them at the nearest kinkos.
I got them from a knucklehead that wanted to put them on the side of a scarab III. You can take them to have scaled down versions made pretty easy.
#9
Registered
Joined: Jan 2006
Posts: 6
Likes: 0
OK, this thread mentions the 1997 23' Scarab Scs decals, does anyone know what the measurements are for the side decals? Someone removed them from a boat that I just purchased and I need to replace them with the origional black decals that were on the boat from the factory.
Any help would be greatly apprieciated.
Help!! Please!!
Any help would be greatly apprieciated.
Help!! Please!!




