Ah yes, the magical carb spacer!

Yes i have carb spacer but thats not what im talking about i have spacer under the engine mount i cannot post picture cause im new here

oh ok carb spacer
i had 86 spyder with tw 330..stock motors
the boat would torwue to right cause of the bbc
would level with drives..but had alphas behing bbc..issue waiting to happen..
think the best it ran was 64....
was good in rough water .......i guess


running up the middle channel.....

If the engines were raised, that would reduce drag. But changing the transom to acomodate that is a ton of work.

Damn, big blocks in a Spyder.

I have seen a few boats with around a 1" thick piece of wood used a spacer for the engine. Some of them seemed to have come that way from the factory but have no way to confirm, and others to compensate for a rotten and sagging stringer.

you need 10 posts to be able to put pictures up...so just do a count down. each post being one number...till you hit 10 posts