Where are all the p29's and what power ?
#241
The hull design is slightly different on the bottom (no moulded in wedges at the chine) ;It is layed up with Kevlar resulting in an approx 800lb weight savings, if I remember right; Obviously, the Blackhawk drives instead of Bravos or Alphas. They were all powered with the 300hp 350 mag mpi and ran a tad over 76mph as I recall.
#242
#246
Registered
Joined: Oct 2007
Posts: 1,273
Likes: 0
From: Rolla/LOTO MO
#249
Registered
Joined: Feb 2009
Posts: 181
Likes: 0
From: Arlington, TX
Says it's a 31, and the paint job is a little bit different, but thought I would post it just in case. Not a Scarab owner myself, just happened across this thread. 39k seems pretty reasonable, and I know they've had this boat for damn near a year, if not longer. I took a peek inside the last time I was there, and it looks to be in pretty good shape. It has triple bostlers in front, which seemed kind of weird to me. Anyway, here's the link.
http://www.southaustinmarine.com/pre...1R0&veh=851372
http://www.southaustinmarine.com/pre...1R0&veh=851372
#250
Says it's a 31, and the paint job is a little bit different, but thought I would post it just in case. Not a Scarab owner myself, just happened across this thread. 39k seems pretty reasonable, and I know they've had this boat for damn near a year, if not longer. I took a peek inside the last time I was there, and it looks to be in pretty good shape. It has triple bostlers in front, which seemed kind of weird to me. Anyway, here's the link.
http://www.southaustinmarine.com/pre...1R0&veh=851372
http://www.southaustinmarine.com/pre...1R0&veh=851372
Last edited by BY U BOY; 10-25-2010 at 10:02 PM.



