saw hull # 27 for sale at anchor marina on sat. 52,000. its a really clean boat still running stock power.

The P-29 is the same as the 1999 and newer 29' scarab's except for the drives?....Right
jc

I thought the P-29 had Kevlar hull. My 31' Fittipaldi was Kevlar.

According to Kona boat (Another Larry Smith Co) the Scarab P-29 had the same hull as the later 29's......The hull was a great design, but the magic was in the drive.

is this a members boat ?

It belongs to Hardbargain he has posted in this thread.

Your right Mike the Magizine said it was Knytex's Kevllar blend.

Any know of a Blackhawk being tried on a 29' single engine? Wouldn't that work quite well?

I think there might be two problems with a blackhawk on a single. 1) the drive might sit too high in correlation with the bottom of the hull (and too low in the water) since it is in the center and the lowest point. 2) In a single engine 29' the torque on a big block might be too much for a blackhawk. I don't know what they can take.Mike

There is a reason they quit making them and I'm sure it was not because they worked so great .