84 Scarab Renovation (ongoing)
#312
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Couple little projects I wanted to get done and finally had some time to do them!
1. Custom Drive Guard - never really liked the lights on the trailer or the ****ty location to attach the tie down straps so I figured I would make a drive guard with all LED lights and a place to attach the straps!
2. Custom fender cradles - these will mount on the floor under the driver and passenger bolsters. Keeps the fenders from rolling around the cockpit! I ended up using some PVC lumber from home depot to make the ends and then some polished aluminum tubing and threaded rod to bolt it all together!
1. Custom Drive Guard - never really liked the lights on the trailer or the ****ty location to attach the tie down straps so I figured I would make a drive guard with all LED lights and a place to attach the straps!
2. Custom fender cradles - these will mount on the floor under the driver and passenger bolsters. Keeps the fenders from rolling around the cockpit! I ended up using some PVC lumber from home depot to make the ends and then some polished aluminum tubing and threaded rod to bolt it all together!
#313
Registered
BTW you Scarab is looking good.
#315
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
#316
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Now I got ya!!
Here is the link to the wire
http://www.wiringproducts.com/conten...ler_cable.html
Here is the link to the junction boxes
http://www.wiringproducts.com/conten...ction_box.html
#317
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
Now I got ya!!
Here is the link to the wire
http://www.wiringproducts.com/conten...ler_cable.html
Here is the link to the junction boxes
http://www.wiringproducts.com/conten...ction_box.html
Here is the link to the wire
http://www.wiringproducts.com/conten...ler_cable.html
Here is the link to the junction boxes
http://www.wiringproducts.com/conten...ction_box.html
BT
#318
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
Well winter is here so time to start some winter projects!
The first one is to wrap the dash panels with the new graphics theme!
Here is what the cluster looks like now and then what the new graphic wrap will look like!
The first one is to wrap the dash panels with the new graphics theme!
Here is what the cluster looks like now and then what the new graphic wrap will look like!