|
|
Originally Posted by 502ss
(Post 4470031)
|
Originally Posted by CDShack
(Post 4469858)
I forgot, was your's 1:1 or 13% over?
|
Originally Posted by Car Biz
(Post 4469973)
5 blades were perfect on mine 17.75 X 28
|
Originally Posted by CDShack
(Post 4470006)
I would love a set of 5 blades. 4 blades are so smooth, I bet 5B is awesome!
That little floor vibration you get with the 4 blade it TOTALLY gone with 5 blades. I tried a 6 blade once and thought my steering broke the boat would "walk up" on the blades:eekdrop: |
Originally Posted by 502ss
(Post 4470054)
Are those 19 spline or are they using the adapters?
Homemade from broken #6 shaft BOATMAN302 made them for his when he had it and he already had two sets of 19 spline wheels so I bought them from him |
For tight turns don't drop the drives. Drop the inside tab and it will pull you right around.
|
Originally Posted by Kaama302
(Post 4470320)
For tight turns don't drop the drives. Drop the inside tab and it will pull you right around.
|
I have a question.
How much slop do you have in your drive if you grab the prop and wiggle it left right. |
Originally Posted by Kaama302
(Post 4470538)
I have a question.
How much slop do you have in your drive if you grab the prop and wiggle it left right. |
| All times are GMT -5. The time now is 05:23 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.