Is this a Wellcraft trim piece???
10-13-2008 | 09:04 AM
#11
Thread Starter
Registered
Joined: Sep 2007
Posts: 633
Likes: 7
From: Fond du Lac, WI Cheeseheads & Kiekhaefer
I think daredevil likes your boat...x 5. 
Great look'n boat. I have a bunch of pics of it. I seen the how to segment on doing your graphics. At first I thought you were some one else. There's another board member with a Vice LTD who's ID is very simular to yours.
Wayne
Great look'n boat. I have a bunch of pics of it. I seen the how to segment on doing your graphics. At first I thought you were some one else. There's another board member with a Vice LTD who's ID is very simular to yours.
Wayne
10-13-2008 | 10:28 AM
#14
Thread Starter
Registered
Joined: Sep 2007
Posts: 633
Likes: 7
From: Fond du Lac, WI Cheeseheads & Kiekhaefer
I must be loosing it. As many KVs as I've been around over the years, I never noticed the piece before. Couldn't find one when I started look'n through my photo files...and I have a lot of KVs on file.
10-13-2008 | 11:53 AM
#16
Registered
Joined: Jan 2008
Posts: 780
Likes: 66
From: Kemah, Texas
10-13-2008 | 03:13 PM
#17
Thread Starter
Registered
Joined: Sep 2007
Posts: 633
Likes: 7
From: Fond du Lac, WI Cheeseheads & Kiekhaefer
Would like to think I'm not loosing it. 
Must have been an option. I've gone back and looked at a lot of 86 - 88 KV files and did find a couple with this piece. They seem to very in design. kvscarab38's is the only one I found that didn't appear in a Vice LTD.
Must have been an option. I've gone back and looked at a lot of 86 - 88 KV files and did find a couple with this piece. They seem to very in design. kvscarab38's is the only one I found that didn't appear in a Vice LTD.
Last edited by scarab kv; 10-13-2008 at 03:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
zimm17
General Q & A
3
03-13-2007 05:23 PM
