I have a 94 30 Scarab Thunder....is there a source for a windshield taller than the 6" factory one?

[email protected]

Can you posst a picture?
We ave the 22" and 38" molds but they can only go so high!

Acrylico - I have a 43 and need to replace the windscreen; 1 verticle crack. Is the 38 & 43 the same; same beamheight?

I really don't know - Can you send me a picture?

These are not the best, but if you tell me what measuremnts you need and what pic view you require I will provide. It is stock, basically a continuos curve about 8" high at the center.

Oh yea, we have that one!

Send me an email to [email protected] and I'll P & D it
All best,

Carlos

My Father In Law has a 97 43 Thunder and just recently had Acrylico build him a windscreen (Smoked). Top notch product and great customer service! Of course shipping took some time but they had to mold the windscreen. When product arrived the packaging was what you SHOULD expect! It arrived in a wood crate with the windscreen wrapped and well protected. I can get some photos up if needed. LMK.

Thanks 31-Thunder, I will probably use them during my winter layup. As there are so few 43"s, love to see pic's of your Father inlaw's boat. Either post or email me if it is not of general interest.

Not a problem, I will post some photos of the new shield in the thread and email some additional photos.

Working on final winter layup for both boats today so it may be later this evening for the pics.