GOT MY BOAT Its a 1985 38' Sarab
09-12-2009 | 05:36 PM
#1
Thread Starter
Registered User
Joined: Feb 2009
Posts: 217
Likes: 0
From: Sacramento
GOT MY BOAT Its a 1985 38' Sarab
It has stock 454 motors. I want to build at least 500hp motors. Do you guys have any suggestions about big bore kits or stroker kits.
Thanks for all the help!!!!!!!!!!!!!! Now Im ready to spend some money
:
Ill get some pictures up SOON
Thanks for all the help!!!!!!!!!!!!!! Now Im ready to spend some money
:Ill get some pictures up SOON
Last edited by sdrockslangers; 09-12-2009 at 05:38 PM. Reason: pictures
09-16-2009 | 10:48 PM
#5
Thread Starter
Registered User
Joined: Feb 2009
Posts: 217
Likes: 0
From: Sacramento
09-17-2009 | 05:24 AM
#6
Registered
Joined: Apr 2001
Posts: 1,849
Likes: 4
From: Boynton Beach FL
Neal Vance racing did my engines. but I had a long down time and a few issues. but now its all good. My motors where 1996 crate gen 6 , 502's , bored to 540 cu/in, stroked to 565 cu/in, full roller valve train, alum heads,H-beam rods ,short skirt pistons, balanced, ported..ect..
11-20-2009 | 02:54 PM
#8
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Neal Vance racing did my engines. but I had a long down time and a few issues. but now its all good. My motors where 1996 crate gen 6 , 502's , bored to 540 cu/in, stroked to 565 cu/in, full roller valve train, alum heads,H-beam rods ,short skirt pistons, balanced, ported..ect..
nice parts list,whats the bore?
