Which prop would be good. Right now I am running a 15.50x22 pitch hydromotive. Speeds are 65ish depending on water conditions at 5200-5300 trimmed up some. I would like to not have to trim it much more then where its at. I can move this prop really easy. Motor is a 383 stroker with a 144 weiand blower. Guessing its making 450-475hp. I wanna keep the rpm's around 5-5300 or maybe alil lower. I am gonna try a 3 blade 14.50x24 pitch this weekend but I am thinking a 4 blade 25 maybe 26 would be something I would like. Is that to much?

I run a 24 Bravo 1 on mine and I like it.

What speeds are you getting gps'd?

I run a turbo 25p, high 60's.

let me know how that prop works. ihave the same set up with a 28 pitch 4 blade turning 4300 about 64 on gps. think i need to come down on pitch some.

I got a bravo 1 26 that I am gonna try out tomorrow. I will post the results.

i have a 24p bravo 4 blade on mine. upper 60's but at 7500 feet base elevation

Have same set up as you sam. ran this weekend 28pitch 4-blade 4800rpm 68 on gps then ran a 3-blade 23pitch 70 at 5950rpm. both props are used and little banged up. those are the only two i had to try.

I have a 29 pitch mirage plus no dings , standad shaft $225.00 shipped no dings

I had a 3 blade 23 Mirage on my 22. Bravo 1. Stock 454. That thing was pretty quick trimmed up. Id say about 70.