Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   Scarab 29 single with - 2 imco (https://www.offshoreonly.com/forums/scarab/300118-scarab-29-single-2-imco.html)

supermx96 07-21-2013 09:15 PM

Scarab 29 single with - 2 imco
 
I am looking to try a -2 shortie on my single Scarab 29 with arond 800hp blower engine.
Now i am runing 80 mph gps and in 1 foot chops water the boat start to dance left and right, is the -2 shortie can help me for that situation also can i improve my top speed?

trc2 07-22-2013 04:59 PM

What prop are you running three blade or four blade We raised my engines and drives up 2 1/2 inches and my boat handles so much better now it will not plane off with three blades any more iam using 24 pitch four blades now

supermx96 07-23-2013 07:06 AM


Originally Posted by trc2 (Post 3962930)
What prop are you running three blade or four blade We raised my engines and drives up 2 1/2 inches and my boat handles so much better now it will not plane off with three blades any more iam using 24 pitch four blades now

I am runing 4 blade 26 pitch lab planing is realy not an isue for now.

hullofjustis 07-23-2013 08:07 AM

I had the exact setup in my 97 29 put a -2 on it you'll love it will pick up 5mph and handle much better

supermx96 07-23-2013 04:12 PM


Originally Posted by hullofjustis (Post 3963408)
I had the exact setup in my 97 29 put a -2 on it you'll love it will pick up 5mph and handle much better

What lower imco or speedmaster? and what prop setup with that -2?
5 mph is a huge gain and better handling, i think its a good investisment to go!

hullofjustis 07-23-2013 08:02 PM

It was an imco lower I used a 26 bravo one 4 blade and spun it to 5900 Rpms but I did have the bottom blue printed but I did that before I built the blower motor and imco lower on


All times are GMT -5. The time now is 04:35 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.