Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   Repower 2000 scarab 38 avs (https://www.offshoreonly.com/forums/scarab/303895-repower-2000-scarab-38-avs.html)

5050 10-10-2013 09:28 PM

What's wrong with your 502s you have in boat? I have 2 502 mag 435hp mpi I'm pulling out of 38 avs with 320 hours that are perfect that I'd make u a deal on, run flawless just to slow.

davidlag 01-04-2014 06:34 PM

go for the hp 500s

Avs38 01-24-2014 07:47 PM

1 Attachment(s)
[ATTACH=CONFIG]517098[/ATTACH]
Got the 496's w/x drives

davidlag 01-27-2014 08:19 AM

I have hp 500 that run great just rebuilt last year installed blowers on them and are putting out about 800 hp net gain was about 13 miles per hour just think a stepped hull with that hp should run over 100 was woundering if any buddy out there has put extension boxes on there 38avs and if so was it worth the effort. but thank for the offer

SANLEONKID 01-27-2014 09:27 AM

Engines look great... one thing about sock power... waaay less maintenance. My 502's can still push my '33 60mph all day. and have been doing for 7+ years now with just oil changes, rubber parts and drive maint. what cruising speed to you expect with them on your 38? I still kick myself for not pulling trigger when I got the '33 and a same model '38 was rt next to her.

5050 01-27-2014 01:33 PM

Ill take a little extra maitenance. Stock power in a boat that weighs over 5 tons is boring to me accelerates like golf cart, but to each there own. You never see twin step Cigs with anything less than 500 horse. Just my .02 cents. 33 prob runs ok with stock power but weight of a 38 is complete diff animal.

Mustangcobra1353 01-28-2014 02:08 PM

Enjoy the setup. Hope it is trouble free and as long as it runs when you turn the key everything else works out.

Avs38 01-29-2014 05:29 PM


Originally Posted by SANLEONKID (Post 4064041)
Engines look great... one thing about sock power... waaay less maintenance. My 502's can still push my '33 60mph all day. and have been doing for 7+ years now with just oil changes, rubber parts and drive maint. what cruising speed to you expect with them on your 38? I still kick myself for not pulling trigger when I got the '33 and a same model '38 was rt next to her.

im going for low attrition... i like the new technology on the 496's and closed cooling as i run in salt. i wont be the fastest boat, but hopefully i'll always start. i was running 74 w/502's. i'd like to think close to that as the 496 actully is rated slightlty higher in HP, but slightly lower in torque. i got a set of 28P Bravo 1 props that im ging to try vs the 26P i ran with the 502.

Avs38 03-21-2014 06:51 PM

2 Attachment(s)
496 are in... Couple adjustments needed.... Risers are an issue
[ATTACH=CONFIG]520727[/ATTACH]
[ATTACH=CONFIG]520728[/ATTACH]

Mustangcobra1353 03-22-2014 09:09 AM

Sweet. Hope the serve you well. I have one in, and the other this week coming up. I have some stringer bracket issues over the 454 MPI's, and cool fuel boxes, and motor mount's. Minor issues almost finished. I believe these engine will do just want we want. Work every time you turn thekey and runs very well, and sound good. More time boating less time breaking. LOL


All times are GMT -5. The time now is 08:10 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.