My p29 winter project
#12
Registered
Thread Starter
Join Date: Sep 2007
Location: Long Lake ME
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Just bought two 350mpi's with prochargers, I'm thinking sell my old engines and making 383 procharged sbc with about 550hp a piece. That should get me to at least 79mph
#16
Registered
Thread Starter
Join Date: Sep 2007
Location: Long Lake ME
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Pictures will be up next week when I catch a break, and one boat is going to be enough this season thanks. Boat is off trailer and transom is being torn apart. Next on the list is replacing bent and split fenders and trailer bunks.
#17
Registered
Thread Starter
Join Date: Sep 2007
Location: Long Lake ME
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Picked up engines yesterday, I found out that the procharger setup is th 7psi system and not the 5psi, so now the engines are putting out 540hp. Time to get them on stands and start ripping them apart. Anyone want to buy two 350 mag mpi 300hp
#19
Registered
Thread Starter
Join Date: Sep 2007
Location: Long Lake ME
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Here are all the pictures I have finally. Also there is a picture of the new gauges too. As far as the project. They did find rot in the center stringer, which is bing replaced as we speak. I did weld new fenders on the trailer last Saturday, and I am waiting on some quotes on engine parts so that I can get the engines assembled quickly. Looking to build some mild procharged fully forged 383s. Hoping to get around 600 hp a piece.[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]