I've made up templates/plywood drill fixtures for the Arneson ASD7 drives. They attach to the outside of the boat and make for an easy drill & cut. I can loan them out if needed.

-Bill




https://cimg9.ibsrv.net/gimg/www.off...9ef4deab97.jpg
https://cimg8.ibsrv.net/gimg/www.off...6b1001c20d.jpg
https://cimg0.ibsrv.net/gimg/www.off...f20bdd151d.jpg
https://cimg6.ibsrv.net/gimg/www.off...12382dfe55.jpg
https://cimg1.ibsrv.net/gimg/www.off...30c8516876.jpg

Thanks for the offer Bill, I just sent you a message.

https://www.offshoreonly.com/forums/...alignment.html

page 1 post 4 there is a pic of the 496 front mount (gil made them) they may clear your pan and they use the feet so they are adjustable too.

lookin real good keep at it

Appreciate that Dan. I’ll likely have to go with the non offshore style. Thanks Bill for going above and beyond on the templates. I look forward to using them.

I’ve been doing a lot of grinding under the cockpit getting ready to glass the stringers in place, also pulled the engines out of the 30 footer. I’ll also be using the tabs off the 30 also.


https://cimg4.ibsrv.net/gimg/www.off...bc5d42b1d.jpeg
https://cimg5.ibsrv.net/gimg/www.off...041b10e30.jpeg
https://cimg6.ibsrv.net/gimg/www.off...5e09f3c51.jpeg

Great progress! Surface rust on the heads?

If we're looking at the same thing, I think that "surface rust" is paint. Same color used on a few parts of the boat. The name on the transom, I think the windshield frame maybe......? I thought the trailer was that color too but doesn't look like it in the pic.

RR

Yes it’s a burnt orange (forgot the code) from about a 2004 Nissan 350z. The windshield frame, trailer, engine, and some hardware and some of the vinyl is that color. It’s gonna have to be repainted now of course.

Ok, i need glasses since last friday but still have nt got them!:)

I haven’t been able to get diddly squat done this week. Finally was able to use Bills template for the arnesons. Worked perfectly thanks a lot. I’ll be able to hang the transmissions and the motors in place to find exactly where to put my engine mounts in the stringers...


https://cimg5.ibsrv.net/gimg/www.off...ae238b6f2.jpeg
https://cimg5.ibsrv.net/gimg/www.off...33f4cbf7f.jpeg
https://cimg3.ibsrv.net/gimg/www.off...06c9793a8.jpeg

https://cimg2.ibsrv.net/gimg/www.off...600899181.jpeg
https://cimg6.ibsrv.net/gimg/www.off...014e12942.jpeg
https://cimg3.ibsrv.net/gimg/www.off...343abe02f.jpeg