Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   38 Scarab Build (https://www.offshoreonly.com/forums/scarab/378209-38-scarab-build.html)

division1 02-03-2023 07:11 PM

Mis we’ll cut the dash out and out steps in !!!!!I know a guy

hblair 02-03-2023 08:33 PM

Kidding aside this looks like a familiar story. Is the cabin floor soft?

I’m sure you noticed how they layed the wood in the boat THEN did the glass work. The wood all touches and causes the rot to wick forward. I hope yours is not as rotten as mine was. I had to replace almost everything.

When I put mine back together I made sure that wouldn’t happen again.

Lot of work but you’ll be happy when you’re done.

Keep the updates coming!

myoung3538 02-04-2023 08:17 PM

Cabin floor was completed rotted away. Cock pit floor was soft in a few spots.

myoung3538 02-04-2023 08:21 PM

I am deep in this thing now! But almost ready to go back together!
https://cimg8.ibsrv.net/gimg/www.off...987fd946f.jpeg
https://cimg0.ibsrv.net/gimg/www.off...0b26fa618.jpeg
https://cimg1.ibsrv.net/gimg/www.off...42cc3b1da.jpeg
https://cimg4.ibsrv.net/gimg/www.off...28567ae8c.jpeg
https://cimg9.ibsrv.net/gimg/www.off...d79fe1feb.jpeg

Helmwurst 02-05-2023 07:09 AM

OMG! How do you ever know where to start? I would be devastated.

division1 02-05-2023 11:56 AM

We’ll you pick up a grinder put a wheel of death on it aka circular saw blade get a buddy with a chain saw and start cutting and don’t stop until you find dry wood. !!!!it’s not all that bad to do just takes some time and effort !

jeff32 02-05-2023 04:44 PM


Originally Posted by division1 (Post 4858557)
We’ll you pick up a grinder put a wheel of death on it aka circular saw blade get a buddy with a chain saw and start cutting and don’t stop until you find dry wood. !!!!it’s not all that bad to do just takes some time and effort !

well said !:)

phughes69 02-05-2023 06:18 PM

myoung3538 , curious as to why you left these parts of the sringers in the engine compartment? Are you going to cut them out later?
https://cimg8.ibsrv.net/gimg/www.off...754fea241.jpeg

myoung3538 02-13-2023 04:45 AM

Moving right along with putting her back together!
https://cimg2.ibsrv.net/gimg/www.off...055417a7b6.jpg
https://cimg7.ibsrv.net/gimg/www.off...11c11b7022.jpg
https://cimg8.ibsrv.net/gimg/www.off...8c3563feb3.jpg
https://cimg9.ibsrv.net/gimg/www.off...192be75f32.jpg
https://cimg0.ibsrv.net/gimg/www.off...d3d0aa884f.jpg
https://cimg1.ibsrv.net/gimg/www.off...00440b7c4f.jpg

phughes69 02-13-2023 05:43 AM

Are you setting this up as a Cover Girl 1/4 cabin style?


All times are GMT -5. The time now is 04:59 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.