Cabin door is broken!
 

It appears that a bolt fell out on the cabin door. Of course it's on the left side--where it slides into the boat. Has anyone had to mess with or repair that door? It looks like a major pain and project. Any help would be greatly appreciated!!

Thanks!:drink:

What model do you have?

I have a 27 Pachanga with a single

It looks like I'm going to roll the dice and take it apart next week. Hopefully, I can get it back together.

Did you ever figure this out? my project 32 has the same issue

Keep us posted I would like to take mine out and tint it. It's a little too clear for using the porti poti. Why Sea Ray didnt make it darker is beyond me.

Me too:drink:

And no kidding, hard to use the potty when you have to hold a towel up.:eek:

The good news is that I did fix the door. The bad news is that it was far from easy. Sea Ray built the door with theives in mind and the only way to get to everything is to take the cabin interior out. We were able to get around this by cutting two pieces in the door frame. I will take pictures soon. If you are just considering tinting it, could you apply the tint with the door in the boat? If possible, I believe this would be much easier.

Good advice Im not cutting nothing!

:angry-smiley-038:I started disassembling to get to the door ( I had most of the interior out already ) and SeaRay built the boat around the door, I'll post some pics