Fast 22's
#142
Platinum Member
Platinum Member
iTrader: (6)
Is there room for the crank pulley to align with the blower snout ? looks light
The following users liked this post:
Revd Up (06-03-2022)
#145
Registered
iTrader: (1)
Whose fuse/relay module you using for the pump ? Looks cool.
#146
Leash electronics makes it. They have a few different variations if you need multiple relays too.
https://leashelectronics.com/
https://leashelectronics.com/
The following users liked this post:
SB (06-02-2022)
#147
Registered
iTrader: (1)
Leash electronics makes it. They have a few different variations if you need multiple relays too.
https://leashelectronics.com/
https://leashelectronics.com/
Your boat project is looking great. :thumbs
The following 4 users liked this post by River_Runner:
#150
[QUOTE
Just getting a feel for it, should have some good numbers to share in the next couple months. This run was 93mph[/QUOTE]
You've spent a lot of time getting past that 90 MPH hump, triple digits soon?
Congrats
Andy
Just getting a feel for it, should have some good numbers to share in the next couple months. This run was 93mph[/QUOTE]
You've spent a lot of time getting past that 90 MPH hump, triple digits soon?
Congrats
Andy