thanks :-)
You asked me for som pics of my exhaust... I did a "turn around" on their way to the tailpipes to be able to insert slip-in silencers. The outside tailpipes was already on when I bought the boat.
I also replaced the standard guages to a set Autometer (sometimes we do unessersary things, but we live only once;-)

http://i1291.photobucket.com/albums/...ps72979e71.jpg
http://i1291.photobucket.com/albums/...psfdaab943.jpg
http://i1291.photobucket.com/albums/...psde7015db.jpg

I have a 86 velocity, 383 small block, 22 pitch 450hp. When aired out flat out I'm getting 78 mph on gps. I would post a pic but can't figure out how lol.

I had the same problem :-) ..the answer I got... "the best thing to do is download photos on photobucket.com then the website will give you a URL for the picture to copy and paste it into the offshoreonly text box". Hope it was helpful
I'd like to see your pics.

Fall radar shoot. Cockpit view of 87.7mph pass.
https://www.youtube.com/watch?v=fs4a...ylj_8p3MF0zCXA

Looks like time for more power........

What's your boat powered by River_runner?
any pics?

Page 5 has the motor info 509ci 650hp. But here are a few more pics of the build.
http://i1246.photobucket.com/albums/...ps6ac3617e.jpg
http://i1246.photobucket.com/albums/...ps61ca46d9.jpg
http://i1246.photobucket.com/albums/...ps68bdb6d8.jpg

JensColbinSwede: Cole-One is my father, any posts by him are of the same pachanga. We have been thinking about power upgrades for the winter... 50/50

Okey, now I understand.. I was a bit lost there.. :-)
How much power are you aiming for? I imagin you want to do more than your 89mph ;-)

My plans for next summer, a 1 or 2 inch shorter lower unit and a better prop, and also flattern the "humps" out on the second step on the body.
I made 82,4mph last test this year.. now it's to cold for boating here..

I'm not so sure you would benefit from taking out the gunnel knots because at speed it is basically out of the water. here is a pic. You can watch my youtube videos as well and see that the boat is out the water above them. I will try to get a gopro video of the transom the next chance I get. I tried a 2" shorty but couldn't get on plane, I did not install the cavitation plate when I put the shorty on so that may have had different outcome if the plate was on.
http://i1246.photobucket.com/albums/...ps2ccee7b6.png