This one would be a hand full. http://dallas.craigslist.org/sdf/boa/4832778567.html

Fin

did you buy the K&N drop in or the complete system?

thanks,
Cris

You might contact BlackBearPerformance.com for a custom tune and also upgrade the intake and exhaust.

Fin

this may be the video?
http://www.msnbc.msn.com/id/21134540/vp=49612000�

Fin

Buck, congrats on the new truck. i may be going to that route pretty soon as well. does it have the max tow and HD package with the 6.5 bed?

Cris

I was at the old factory a few months ago buying a storm shelter. They are selling safe rooms out of the plant. http://www.stormsaferoom.com/
The guy that helped me was Brad Webb. When going into...

check the pitman arm on the steering box.
you need the stock one. most installers put the drop pitman arm on when lifting but a jeep doesnt need one unless over 4' lift.
basically jump up and down...

this is another product you can use.
http://www.wakejunky.com/Right.htm

Fin

i headed south to the 281 and 412 intersection then east to let the storm pass.
caught view of a couple tornados going by. we got no hail, but when we got back, the guys that stayed behind were not...

Raylar,
thanks for the assistance with this. where would they be in reference to the engine mounts?

thanks,
Fin

Thanks,
i have not seen a hex head bolt on the block that would drain the coolant. i did remove a plug that had a knock sensor on it thinking that would drain the coolant and noting came out when i...

When looking at this picture. #14 on the port side looks to be inboard of the engine mounts....

correction, the plug i saw may actually take an allen wrench instead of a torx. it was hard to see at the angle. if it is an allen wrench. Does anyone know what size it is? It looks pretty large....

i have a 496 mag closed cooling system engine in a 2003 Crownline. I am planning on draining the coolant and adding new. The manual says to remove the hex plugs that are located about 6" from the...

i had the great big mable and it was great for our kids. We could even put more than 4 smaller ones on it. The issue was that when it was inflated it was huge and weighed a ton especially when...

can the ubolt be installed without removing the drive and part of the gimbal ring?

thanks,
Fin

in the past i believe they have sent the leisure boats towards the dam and the performance boats towards shangra la.

fin

i was going to do some general maintenance on the boat and have read that you can retorque the upper gimbal ring u bolt about every 100hrs. I have also read that you should never touch it and it...

Does anyone know how the course will be laid out yet?

Fin

posted today in the Tulsa World http://www.tulsaworld.com/news/article.aspx?subjectid=12&articleid=20110713_12_0_CHANDL880703

Fin

I noticed GRDA has not updated their website since the 8th about the BGA. http://www.grda.com/grda-to-continue-daily-water-monitoring-sampling%e2%80%a6/

it would be nice to get a possitive update...

Carter,

where did you find a ramp big enough on tenkiller to unload the Top Gun?

Cris

Bub,
you still at the lake?

Cris

here is another couple other resources.
http://quad4x4.com/Ford%20Front%20Axle%201998-up.htm
or towsley ford http://www.tousleyford.com/index.cfm?action=parts&subaction=partsform

Fin

yep, all from Saturday.