Offshoreonly.com

Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Merc Water pressure relief valve # >

Merc Water pressure relief valve #

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices
General Boating Discussion

Merc Water pressure relief valve #

Thread Tools
 
Old 07-16-2003 | 10:33 AM
  #11  
GLH's Avatar
GLH
Platinum Member
20 Year Member
Platinum Member
 
Joined: Dec 2002
Posts: 15,270
Likes: 21
From: Burlington, VT
Default
Is it adjustable or set at 25#?
GLH is offline  
Reply
0
Old 07-16-2003 | 11:15 AM
  #12  
offshor
Guest
 
Posts: n/a
Default Valve
No adjustment on the outside....didn't open it.
 
Reply
0
Old 07-16-2003 | 07:54 PM
  #13  
rbtnt's Avatar
rbtnt
Charter Member
20 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 1,074
Likes: 0
From: Central, Ohio USA
Default
Nice pictures. What size hose for engine water?
rbtnt is offline  
Reply
0
Old 07-16-2003 | 08:52 PM
  #14  
Kanookstr's Avatar
Kanookstr
32' SUNSATION
 
Joined: Feb 2001
Posts: 1,143
Likes: 0
From: MA
Default
Well doesn't that make things easier thanks Offshor. I'll have it for the next project..
Kanookstr is offline  
Reply
0
Old 07-16-2003 | 09:01 PM
  #15  
US1 Fountain's Avatar
US1 Fountain
Ginger or Mary Ann?
25 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Default
FINALLY. A simple cure!

Does it have to dump thru a thru hull fitting, or is there someway to tap into the stock cast iron exhaust? Don't want to drill any holes in the transom. May be best to add a bung to the silent choice divertor valves to keep the water back as far as possible???????
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
US1 Fountain is offline  
Reply
0
Old 07-16-2003 | 09:10 PM
  #16  
Kanookstr's Avatar
Kanookstr
32' SUNSATION
 
Joined: Feb 2001
Posts: 1,143
Likes: 0
From: MA
Default
Thats what I did US1, I welded 3/4" bungs in the direction of the exhaust flow near the tips.
Attached Thumbnails Merc Water pressure relief valve #-dump.jpg  
Kanookstr is offline  
Reply
0
Old 02-13-2004 | 08:24 PM
  #17  
ClassCig38's Avatar
ClassCig38
Gold Member
 
Joined: Feb 2002
Posts: 255
Likes: 0
From: Chicago
Default
Well, It's been since July when this was brought up last.
How has this worked for the people that bought them.

Mark
ClassCig38 is offline  
Reply
0
Old 02-13-2004 | 08:27 PM
  #18  
ClassCig38's Avatar
ClassCig38
Gold Member
 
Joined: Feb 2002
Posts: 255
Likes: 0
From: Chicago
Default
Looked them up on the BAM website $102
Part # 863208A3
Fox Hunter did you see this?

Mark
ClassCig38 is offline  
Reply
0
Old 03-16-2004 | 09:36 AM
  #19  
Dave1972's Avatar
Dave1972
Registered
 
Joined: Oct 2001
Posts: 1,153
Likes: 0
From: Madison, WI
Default
How has this worked for the guys that have used them? How much trouble is it to weld the 3/4 bung to the silent choice diverter?
Dave1972 is offline  
Reply
0
Old 03-16-2004 | 10:13 AM
  #20  
merlin540
Guest
 
Posts: n/a
Default
COULD YOU USE THESE WITH A SET UP WITHOUT A CIRCULATING PUMP. PUT IN BEFORE A CROSSOVER SETUP??????
 
Reply
0



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.