IMCO / NORDIC in POWERBOAT MAGAZINE
06-03-2005 | 11:09 AM
#1
Thread Starter
Registered
Joined: Mar 2002
Posts: 1,335
Likes: 0
From: LONG ISLAND-NY
IMCO / NORDIC in POWERBOAT MAGAZINE
Hey fellow NORDIC fans........This months Powerboat Mag has a great article on the highly customized IMCO / NORDIC 35 with a Paul Pfaff 1200 HP/ IMCO dual drive splitter. Was built by IMCO who commissioned NORDIC for the build as a long distance endurance boat.......ran 109 but had nore and can be tweeked to over 112 for a single 35....NICE WORK FELLAS 
06-04-2005 | 05:13 AM
#3
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Re: IMCO / NORDIC in POWERBOAT MAGAZINE
Looked good. Back seat won't much, but at 108 who wants to have a lot of passengers? Great to see Nordic breaking out of the stock stuff.
06-06-2005 | 08:35 AM
#4
Registered
Joined: Mar 2002
Posts: 1,546
Likes: 4
From: Layton, Utah
Re: IMCO / NORDIC in POWERBOAT MAGAZINE
Originally Posted by Steve Zuckerman
Let's see, 2 drives splitting single engine 1200 HP, or 600 per side, running well over 100..........sounds interesting 
Steve
Steve
Might be a weight factor...
That splitter must be very efficient.
Last edited by Nordicflame; 06-06-2005 at 08:37 AM.
06-06-2005 | 05:22 PM
#5
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Re: IMCO / NORDIC in POWERBOAT MAGAZINE
Also, look at the RPM, 6000, a blower moves the same horsepower torque curve up tremendously. Torque & HP cross at 5250. The torque curve on the blower does hardly fall off past that.
Thread
Thread Starter
Forum
Replies
Last Post
DelawareRiverRunner
General Boating Discussion
10
10-22-2005 10:49 AM
