Oil Pan for BBC
06-28-2005 | 07:51 PM
#1
Thread Starter
Registered
Joined: May 2004
Posts: 72
Likes: 0
From: Orlando, Florida
Oil Pan for BBC
I need an oil pan for my build, can someone please point me to a decent vendor. I'm familiar with the main vendors within the classifieds.
Or if anyone has a factory 454/502 Mercruiser pan they want to part with let me know.
Thanks.
Or if anyone has a factory 454/502 Mercruiser pan they want to part with let me know.
Thanks.
06-28-2005 | 08:30 PM
#2
Platinum Member
Joined: Jun 2004
Posts: 7,317
Likes: 1,037
From: frankenmuth michigan
Re: Oil Pan for BBC
I'm running a hardin 14 qt pan on mk 4 merlin block,its fit and finish are NOT impressive. I tried using a felpro 1 piece retro gskt originally and you could slide a .010 feeler gauge thru rail area into block,it would have leaked for sure. It needs a 1/2 tube of good RTV to even think about sealing,Smitty
06-29-2005 | 07:17 AM
#3
Registered
Joined: Jul 2004
Posts: 324
Likes: 0
From: STEVENS POINT WI
Re: Oil Pan for BBC
06-29-2005 | 08:26 AM
#4
Thread Starter
Registered
Joined: May 2004
Posts: 72
Likes: 0
From: Orlando, Florida
Re: Oil Pan for BBC
Crud.
I'm running a Gen IV.
On a side note I picked up a Hamburgers 10 quart from Summit for $199. After looking at Milidon, Moroso, and Canton.
I'm running a Gen IV.
Originally Posted by hpy540
On a side note I picked up a Hamburgers 10 quart from Summit for $199. After looking at Milidon, Moroso, and Canton.
Last edited by TwinTurboStroker; 06-29-2005 at 08:30 AM.
