What's a set of GM Rect. port head worth?
10-12-2005 | 07:06 PM
#1
Thread Starter
Gone Fishin'
Joined: Nov 2000
Posts: 7,408
Likes: 0
From: Grand Rapids/Holland/Grand Haven
What's a set of GM Rect. port head worth?
I'm now parting out my dead motor. Heads are fine. They are GM rect. port magnum heads. They have been cleaned up, not pollished per say, but cleaned up (little imperfections and bumps taken out of the combustion chambers and runners). I could make them available two ways:
Bear or
Assembled with Crane gold roller rockers.
What do you guys think? They are doing me no good, I could use the money, and I'm sure somebody somewhere needs a set of heads.
I also have a 454 gen 4 oil pan that Baker Engineering modified to 7 quarts, with anti-slosh (or whatever you call it) gate.
magnum intake manifold too....
Bear or
Assembled with Crane gold roller rockers.
What do you guys think? They are doing me no good, I could use the money, and I'm sure somebody somewhere needs a set of heads.
I also have a 454 gen 4 oil pan that Baker Engineering modified to 7 quarts, with anti-slosh (or whatever you call it) gate.
magnum intake manifold too....
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
10-12-2005 | 08:18 PM
#3
Thread Starter
Gone Fishin'
Joined: Nov 2000
Posts: 7,408
Likes: 0
From: Grand Rapids/Holland/Grand Haven
Re: What's a set of GM Rect. port head worth?
Originally Posted by AIR TIME
I sold mine with springs, inconel valves set up for hy roller for 800 ps pocket ported also.
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
10-12-2005 | 08:32 PM
#4
Registered
Joined: Feb 2002
Posts: 763
Likes: 0
From: Honeoye, NY
Re: What's a set of GM Rect. port head worth?
They could bring that $ AFTER they pass magnuflux. And then I would install Inconel or Super Alloy exhaust valves before using in ANY kind of hi-perf marine application. --- Jer
10-13-2005 | 05:42 PM
#5
Registered
Joined: Jan 2004
Posts: 716
Likes: 139
From: South of the North Pole
Re: What's a set of GM Rect. port head worth?
I recently sold sold a pair of 781 heads for 200 bucks.
Round port, open chamber - great street heads. Used, but in usable shape.
I don't think you are going to get much more than that.
Get the casting numbers and do a search at www.racingjunk.com in the used parts section. That should give you a good idea of what sellers are asking for similar heads.
Round port, open chamber - great street heads. Used, but in usable shape.
I don't think you are going to get much more than that.
Get the casting numbers and do a search at www.racingjunk.com in the used parts section. That should give you a good idea of what sellers are asking for similar heads.
Thread
Thread Starter
Forum
Replies
Last Post
divenstar
General Boating Discussion
3
10-03-2008 07:48 AM
