Leaking cylinders or trim pump.
12-13-2005 | 03:41 AM
#1
Thread Starter
Registered
Joined: Oct 2001
Posts: 279
Likes: 0
From: Palm City, FL
Leaking cylinders or trim pump.
I can't find the thread that explains this scenario but I know I read it somewhere.
I raised my drive all the way up, marked the fluid level of the trim reservoir, let it sit overnight. The drive bled down as usual and when I checked the fluid level, it did not appear to have moved.
Does this indicate bad cylinders or trim pump (check valve???)?
Thanks,
CTA
I raised my drive all the way up, marked the fluid level of the trim reservoir, let it sit overnight. The drive bled down as usual and when I checked the fluid level, it did not appear to have moved.
Does this indicate bad cylinders or trim pump (check valve???)?
Thanks,
CTA
12-15-2005 | 01:25 PM
#2
Thread Starter
Registered
Joined: Oct 2001
Posts: 279
Likes: 0
From: Palm City, FL
Re: Leaking cylinders or trim pump.
12-15-2005 | 08:06 PM
#3
Registered
Joined: Nov 2003
Posts: 9,950
Likes: 0
From: 1 Flu Ovr KuKos Nest-WI
12-27-2005 | 06:09 PM
#4
Thread Starter
Registered
Joined: Oct 2001
Posts: 279
Likes: 0
From: Palm City, FL
Re: Leaking cylinders or trim pump.
O.k. I took the big hex cap off of both sides of the trim pump and one of them was missing a spring to hold the check valve down. By the Mercury parts diagram these springs are not available separately. I also checked ebasicpower.com for aftermarket and could not find it. Are they available or do you have to hunt for used parts?
Thread
Thread Starter
Forum
Replies
Last Post
ratman
General Boating Discussion
5
01-26-2006 07:48 PM
