625hp in a 29' Fountain?
#1
Thread Starter
Registered
Joined: Nov 2005
Posts: 81
Likes: 0
From: Or-E-gone
Has anyone installed 625+hp in a 29' fountain fever? The boat is a 2002 vintage. The boat will run 77-78mph with a 525 efi. However, hoping to get 85+mph with that amount of hp.
#2
Originally Posted by ANDREW REALTOR
I thought it whould be faster with 525's than 77-78 how fast does the dealer say it goes with 525's with 625 I whould guess you should see at least 80-85 

I think he is referring to a single motor application in which case those are some decent numbers.
#5
Originally Posted by Cam-shaft
Has anyone installed 625+hp in a 29' fountain fever? The boat is a 2002 vintage. The boat will run 77-78mph with a 525 efi. However, hoping to get 85+mph with that amount of hp.
#8
To much power is never enough. Pump it up ! as much as you can. It's addicting isn't it ? After going 90 with a smile that wraps around my entire head !, it's hard to enjoy a cruise in a "slow" boat.
to me 625hp isn't enough. Unless it goes in a Skater... I'll find out how my 650-675 horse 540 does in my 24 Formula this summer. Maybe not enough boat but never too much motor !!! . You have a decent , good sized boat. Enjoy it !!! BBB
to me 625hp isn't enough. Unless it goes in a Skater... I'll find out how my 650-675 horse 540 does in my 24 Formula this summer. Maybe not enough boat but never too much motor !!! . You have a decent , good sized boat. Enjoy it !!! BBB
#9
There is a 29 Fountain (single engine) on Lake Wylie south of Charlotte with over 1000 HP running 110 MPH!
Maybe some of the guys that know more of the details on this boat will come on here and share.
Maybe some of the guys that know more of the details on this boat will come on here and share.
#10
Thread Starter
Registered
Joined: Nov 2005
Posts: 81
Likes: 0
From: Or-E-gone
More input needed. I would like to make more power however I do not want to give up the stock appearance of the 525efi. Those 525efi headers are application specific, as far as the exhaust flanges are drilled.



