Can anyone tell me what it would cost to fully rig a 10 meter fountain, complete with power,outdrives, and steering.. the boat is completly bare.. thanks in advance..

depends,,,all good livorsy stuff will cost more than vdo stuff.

What power? what drives? external steering? what tabs? What gauges like fast said, what, what, what... there are lots of them in this question.

yuo'll have about25 to 30k in the rig with parts, like guages,harnesses, cables, throttles, indicators, wire, battery's, batt trays, batt cables,pumps, hoses, misc, etc,,, . dependind on power, add another35- 40 to 80+k , if its used or new. roughly.

good luck.

good luck

jr mike

hope Reggie's helping you

jr

It will cost you more than a good used one already rigged.

Id say 20K Minimum

I agree with dangerous Dave there are a lot of nicely rigged used boats for fair money out there. You have to look but off the top of my head I know of one scarab and one formula both memebers on this site here in the 30's for sale.

But if looking to rig I would say around 25-30k all new unless you want used then it just alot of others peoples problems all in one boat.

Power alone will cost you 15k per side.
Drives about $8-10k per side.
There is 50 just in drivetrain.