47 with 3600hp
08-24-2006 | 04:55 PM
#1
Thread Starter
Registered
Joined: Aug 2006
Posts: 10
Likes: 0
From: Greenwood, Indiana
47 with 3600hp
Just wanted to say hello to the Fountain people. We are a new advertiser on oso. We are an Eliminator Boat dealer but do work on alot of Fountains. Heres a picture of a 47 we just finished for a customer on Lake Cumberland. The engines are 1200hp each and we rigged it with the new Imco hp1000 drives
08-24-2006 | 07:38 PM
#3
Platinum Member
Joined: Dec 2005
Posts: 662
Likes: 0
From: Apollo Beach, FL.
Re: 47 with 3600hp
Originally Posted by SchumakerPerformance
Just wanted to say hello to the Fountain people. We are a new advertiser on oso. We are an Eliminator Boat dealer but do work on alot of Fountains. Heres a picture of a 47 we just finished for a customer on Lake Cumberland. The engines are 1200hp each and we rigged it with the new Imco hp1000 drives
Whose motors are those? Did you increase the fuel tank size?
08-24-2006 | 09:02 PM
#4
Thread Starter
Registered
Joined: Aug 2006
Posts: 10
Likes: 0
From: Greenwood, Indiana
Re: 47 with 3600hp
I have a few more pictures on my computer at the shop. I'll post em up in the morning. We built the motors. As far as speed we have not pushed the new set up past 125gps yet. The fuel tanks are factory original. And I will post more pics tomorrow. The only engine pics I have on this computer are a couple procharged 1000s we built for oso member eliminator05
08-25-2006 | 08:16 AM
#7
Thread Starter
Registered
Joined: Aug 2006
Posts: 10
Likes: 0
From: Greenwood, Indiana
Re: 47 with 3600hp
pm is not to awful bad. They are all hyd. roller so the only thing to worry about is oil changes about every 20 hours. Overhauls are expected in the 150 hour area. Of-course that depends on how hard its run and how well its taken care of.
08-25-2006 | 11:58 AM
#9
Registered
Joined: Jun 2005
Posts: 1,232
Likes: 3
From: Chesapeake, Va.
Re: 47 with 3600hp
Originally Posted by SchumakerPerformance
pm is not to awful bad. They are all hyd. roller so the only thing to worry about is oil changes about every 20 hours. Overhauls are expected in the 150 hour area. Of-course that depends on how hard its run and how well its taken care of.
