496 Mag HO Winterization
#1
Thread Starter
Registered
Joined: Jan 2004
Posts: 835
Likes: 0
From: NY
Does anyone know where I can find step by step instructions for winterizing a 496 Mag HO??
Barnes and Noble was sold out of "Winterization for Dummies"
Feel free to post instructions if you have done it before.
Thanks
Barnes and Noble was sold out of "Winterization for Dummies"
Feel free to post instructions if you have done it before.
Thanks
#2
My procedure:
1. grease trailer bearings, coupler, gimble
2.run fuel as low as possible, stabalize whats left...
3. start engine, get up to operating temp. Change engine oil and filter
4. Change gear lube.
5. pump out water with little blue pump.
6. start engine and run 2 gallons of pink RV anti-freeze through it and stop.
7. pull fuel filter, dump half the gas out of it and fill the rest with 2-stroke oil.
8. reinstall fuel filter, start engine run an additional 2 gallons of pink RV.
9. pump out RV with little blue pump.
10. Depending on how anal you are, pull each plug and squirt oil into cylinders.
11. Install fresh fuel filter.
I usually run between 40-60 hour per season, I do one oil and drive change per year at the end of each season right before winterizing..
1. grease trailer bearings, coupler, gimble
2.run fuel as low as possible, stabalize whats left...
3. start engine, get up to operating temp. Change engine oil and filter
4. Change gear lube.
5. pump out water with little blue pump.
6. start engine and run 2 gallons of pink RV anti-freeze through it and stop.
7. pull fuel filter, dump half the gas out of it and fill the rest with 2-stroke oil.
8. reinstall fuel filter, start engine run an additional 2 gallons of pink RV.
9. pump out RV with little blue pump.
10. Depending on how anal you are, pull each plug and squirt oil into cylinders.
11. Install fresh fuel filter.
I usually run between 40-60 hour per season, I do one oil and drive change per year at the end of each season right before winterizing..
Last edited by Chris288; 09-29-2006 at 09:31 AM.
#3
Registered
Joined: Mar 2003
Posts: 54
Likes: 0
Originally Posted by Chris288
My procedure:
1. grease trailer bearings, coupler, gimble
2.run fuel as low as possible, stabalize whats left...
3. start engine, get up to operating temp. Change engine oil and filter
4. Change gear lube.
5. pump out water with little blue pump.
6. start engine and run 2 gallons of pink RV anti-freeze through it and stop.
7. pull fuel filter, dump half the gas out of it and fill the rest with 2-stroke oil.
8. reinstall fuel filter, start engine run an additional 2 gallons of pink RV.
9. pump out RV with little blue pump.
10. Depending on how anal you are, pull each plug and squirt oil into cylinders.
11. Install fresh fuel filter.
I usually run between 40-60 hour per season, I do one oil and drive change per year at the end of each season right before winterizing..
1. grease trailer bearings, coupler, gimble
2.run fuel as low as possible, stabalize whats left...
3. start engine, get up to operating temp. Change engine oil and filter
4. Change gear lube.
5. pump out water with little blue pump.
6. start engine and run 2 gallons of pink RV anti-freeze through it and stop.
7. pull fuel filter, dump half the gas out of it and fill the rest with 2-stroke oil.
8. reinstall fuel filter, start engine run an additional 2 gallons of pink RV.
9. pump out RV with little blue pump.
10. Depending on how anal you are, pull each plug and squirt oil into cylinders.
11. Install fresh fuel filter.
I usually run between 40-60 hour per season, I do one oil and drive change per year at the end of each season right before winterizing..
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
23
12-10-2007 05:23 PM




