Where can I buy the end that goes on a Morse 33C cable where it attaches to a k-plane? (used for the indicators) I previously used a pivot-ball like you would use to attach a throttle cable to a carb, but it rusted and I'd like to find a stainless one...

a few tricks....

buy a small length of fiberglass rod. cut it. drill it. tap it 10/32 thread. machine( or grind a flat surface onto one side of the opposite end tapped)and install.

use a mercury throttle/ shift cable end.

use a an alternate material other than the glass rod.


good luck

p.s or call mercury and get the original kiekafer ends.

Hardin Marine 877-900-7278 www.hardin-marine.com

Any Merc dealer can get them. I got some a couple years ago.

http://www.mercruiserparts.com/Show_...ND+845630A1%29

This is how mine are attached.

Steve

I know exactly what your looking for. Its the old design and may be obsolete. If that is the case I may have one some where but God knows where. Let me know if ya can't locate them from Bam & wll look for it in the meantime.

Thanks for your help folks. I'll see what I can dig up...