I need to again replace my impellor on my sea pump (old style with fuel pump provision, but blocked off). I dont trust the pump I have and was looking at the Jabsco model.
Question is will the Jabsco accept the press on pully I currently have or will I need to get the bolt on pulley?
Also anyone have any opinions on the Jabsco pump?

I do not know about the pully but I used to run their pumps on my motor before the new motors that have the fuel pumps on them and I loved them.

Jon

Good question, That stock plastic pump cracks if you look at it wrong. Definitley NOT trustworthy. I cracked 1 just painting the damn thing on the bench. Handle carefully!

The Jabsco pumps are what I have used for years in every boat I have owned. dont remember any issues with the pulley but I think mine were all bolt on. Far superior compaired to the plastic ones.

If I need to buy a whole pump, I'll only go with the Jabsco.
Looks like you need the bolt on pulley.
http://www.jabsco.com/products/marin..._213/index.htm

Wish they made the setup for fuel pump for GEN5/6 engines

Dennis

Pretty sure you need the bolt on pulley. Hopefully someone will confirm if it will align with your setup.
I just bought a Jabsco on Monday (Labor Day). Went to replace impellor but the housing didn't look so great. Nobody that was open & close by had the housing kit so I took the hit to the groin and just bought the Jabsco for $270. Bolted back in easily and enjoyed the day on the water.
I'll be going with crank-mounted pumps soon and I'll be selling this Jabsco...