Sweet spot on a 26' Daytona?
#1
Thread Starter
Registered
Joined: Jun 2001
Posts: 1,213
Likes: 0
From: Tulsa, OK, Grand, Beaver, LOTO
My 25 that I ran for 3 yrs seemed to free up around 55 or so, my 30 seems to be closer to 65, on a 26, at what speed does the belly release to give the optimum cruise? I realize fuel/passnegers have an impact. I'm figuring at almost 27' it's heavier but maybe packing more air too.
#3
Thread Starter
Registered
Joined: Jun 2001
Posts: 1,213
Likes: 0
From: Tulsa, OK, Grand, Beaver, LOTO
You know I wanted to..... just can't- work stuff slammed me, then off the jeep races.
I was at an XRRA race last weekend, giot a lot of quality time with the Speed channel crew, turns out the same crew is headed to LOTO to cover the shootout
#4
Registered

Joined: Jun 2007
Posts: 965
Likes: 8
From: Osage Beach, MO
Thats the same thing I keep telling Him. Hell I even offered a place to stay and a free boat ride to go find you. Geez youd think the #1 rock crawler in the country would take a weekend off and head to the lake.
JJ Ken,
Good luck at Rockport.
#5
My 25 that I ran for 3 yrs seemed to free up around 55 or so, my 30 seems to be closer to 65, on a 26, at what speed does the belly release to give the optimum cruise? I realize fuel/passnegers have an impact. I'm figuring at almost 27' it's heavier but maybe packing more air too.
We have the best cruise at 80. This is with a pair of wackers though. I can watch the fuel flow on the Smartcraft stay the same from 70-80 as the hull starts to work. This is right at 5000 rpm. 5k=80, 6k=100, and 6850=112. Our '01 Daytona with the 575 didn't have a sweet spot. Best ever was 89.8 and that's with the Arizona Speed and Marine kit.............
It always felt stuck to the water.
#7
Registered

Joined: Jun 2007
Posts: 965
Likes: 8
From: Osage Beach, MO
#8
I am thinking around 53-55. I have not really paid much attention to this but when I bought the boat it had a 330hp 454 & was over proped big time wth a borrowed prop. I only took the boat out about twice with that motor. I had notice around 52-55 it started to really lift. That was about the same speed that the motor ran out out of HP also.
The 26 has a 8'6" beam. The 30 has a 9' beam so I am guessing the 30 can pack more air, but also has more weight in rear due to twin engines.
The 26 has a 8'6" beam. The 30 has a 9' beam so I am guessing the 30 can pack more air, but also has more weight in rear due to twin engines.





