Roller cam bearings
02-09-2008 | 01:04 PM
#1
Thread Starter
Registered
Joined: Dec 2003
Posts: 1,991
Likes: 12
From: Socialist Republic of Washington State
Roller cam bearings
Anyone using Torrington style roller bearings for you cams?
If so, Did your bearing casings need to be drilled for an oil feed and what size feed did you use?
If so, Did your bearing casings need to be drilled for an oil feed and what size feed did you use?
02-09-2008 | 03:36 PM
#2
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 9
From: Ms
I wouldn't think ya wouldnt need it in a regular marine application ,unless its race stuff 50mm cams.Ya might try Crower,I think there the first ones to make a cam for the needle bearings. they called it Inrad.They have the SBC 50mm cam size at 1.968 and the 55mm at 2.165
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
02-09-2008 | 08:16 PM
#3
Thread Starter
Registered
Joined: Dec 2003
Posts: 1,991
Likes: 12
From: Socialist Republic of Washington State
I wouldn't think ya wouldnt need it in a regular marine application ,unless its race stuff 50mm cams.Ya might try Crower,I think there the first ones to make a cam for the needle bearings. they called it Inrad.They have the SBC 50mm cam size at 1.968 and the 55mm at 2.165
02-10-2008 | 11:30 PM
#4
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 9
From: Ms
Find someone that has one of these.Hopefully they will know how to use it or atleast know what it is
http://www.bhjinc.com/1products/04-B...entfixture.htm
http://www.bhjinc.com/1products/04-B...entfixture.htm
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
