I repowered my Baja from 502 MAG to 496HO, my mechnaic told me I need to replace my 3blade props with 4 balde props, which one should I buy?
thanks
AM

I had an unlimited supply of Mercury props when I owned my 1997 38' Baja. I tried the 22, 24, & 26" Bravo 4 blades. The boat hated all three. Blow out, ride levelness, - all were off. I think the 4 blades lifted the rear too much. I then tried several sizes of the Mirage 3 blades. I had 502 MPI's and the 21 was not enough and the 23 was too much for large loads. I had the 23's bent to 22 and was perfect. Try and find someone with 4 blades on a 38 Baja and see if they are working ok. I didn't try other mfgs. (Hydromotive, Herring, etc.).

I've got a buddy with 26 Bravo I's on a 1993 that we repowered with 500 EFI's. I'd call Breet at Blades and talk to him, he will get you set up.

rev4 by merc would help if the b1s didn't call brett

Do you have a contact info for Breet at Blades,
thank you

do you have a contact infor for Breet ?

Yes:

Brett A. Anderson
Shop 920-295-4435
FAX 920-295-4436
www.bblades.com

I ran revoluton 4's on my 38 repowered with 496's and they offered the best overall performance.

which pitch?
thanks
AM

I had 1.36 drives and ran 22 pitch that had been reworked to 23's